Copy Quality Problems

::    Q: Copies still have line(s) on them, even after performing the previous step.
           What do I do?
      A:  The Main Charger may need to be cleaned. (View Instructions).

::    Q: I performed the above steps, but I still have lines on my copies. What do I do now?
      A:  Please give us a call at 303-751-7307 ext.12 or 1.877.283.1634

:: Dirty copies
::    Q: Copies coming out have dark spots on them. What do I do?
      A: If lines appear in the same location of the page every time, please make sure the
          copier glass is clean and free of debris (View Instructions).

::    Q: Copies still have spots on them, even after performing the previous step.
           What do I do?
      A:  Please give us a call at 303-751-7307 ext.12 or 1.877.283.1634

:: Copies are skewed
::    Q: Copies coming out are skewed. What do I do?
      A: Make sure the green and silver guides inside the drawers are tight against the paper
          and the paper does not have any bent corners (View Instructions).

::    Q: Copies coming out are skewed even after performed the previous step.
           What do I do?
      A: If the Document Feeder is used to make copies, please check if it's guides are tight
          against the originals.

::    Q: Copies are still coming out skewed even after performing all the previous steps.
           What do I do?
      A:  Please give us a call at 303-751-7307 ext.12 or 1.877.283.1634